Verze 001-GBR (19.05.2021)
Stránka
2
z
2
D-502-0174
QUICK MANUAL FOR USE AND INSTALLATION
Xvent s.r.o.
Poděbradská 289
53009 Pardubice-Trnová
Commissioning
General Information – Safety
-
Before starting all installation work, make sure that the mains power outlet you want to use to connect the unit is equipped with
a protective contact (pin).
-
The electric supply plug must always remain accessible to allow safe disconnection of the unit from the mains in case of danger
-
The electrical cable to be connected to the mains must not be broken
-
When handling the unit, disconnect the device from the mains first (pull out the plug from mains socket).
-
It is forbidden to interfere in any way with the internal connection of the unit
Switching on the unit
-
Check that all fixation elements used during transport are removed
-
Connect the MiracleAir to the mains using the mains cable (part of the unit).
-
On the back side of the unit, switch on the main switch from the 0 position to the I position
-
Turn the main control element (dial) approximately to the mid-position of the output scale (vertical)
-
On the main control panel, the blue signal diode lights up, which indicates the operation of the unit
-
The unit starts to run at speed to achieve the set output. The rise time of the unit fan may take about 5 sec.
-
Unit ready for operation
Performance setting for the MiracleAir 300-A aerosol extractor
The setting for effective exhaust performance is graphically shown on the scale of the main control (dial) by the symbol of the exhaust
arm; effective suction output is marked with dark colour.
MINIMUM RECOMMENDED PERFORMANCE SETTINGS
FOR EXTRACTION UNIT –EFFICIENT EXTRACTION
DISTANCE IS approx. 20 cm
MAXIMUM PERFORMANCE SET UP FOR THE EXTRACTION
UNIT –EFFICIENT EXTRACTION DISTANCE IS 30 cm
Performance setting for air cleaner – MiracleAir 400-B unit
-
To adjust the filtration output, use the main control (dial) over the full scale.
-
To select the correct output of the filter unit, always consider conditions of the area in which you will operate it.
-
Depending on the surface size of the filtered area, select the appropriate unit performance settings.
MiracleAir 300-A; MiracleAir 400-B
