11
Version 1 – GBR (25/10/2022)
D-502-0287
1.7.17.
Diaphragm multi-grommet
(position 17)
-
The multi-grommet is used to connect external accessories to the unit while maintaining ingress
protection (IP)
1.7.18.
Screw-in grommet
(position 18)
-
It is designed for the passage of a communication cable (e.g.: UTP) to connect the unit to the parent BMS
system
1.7.19.
Supply cable
(position 19)
-
It connects the unit and the connection point from the mains. Cable length approx. 1 m. The CYSY 3x1.5
mm
2
cable type with stripped and marked ends of 50 mm.
1.7.20.
Condensate drain
(position 20)
-
Plastic condensate drain made of ABS material. It is used to drain condensate from the unit.
1.7.21.
Connection sockets
(position 21)
-
The
Ø 125 mm
connection sockets are made of 0.5 mm thick galvanized sheet metal. To increase corrosion
resistance, they are powder coated with RAL 9005. For better sealing of the connected pipes, the sockets
are fitted with a rubber sealing bit that can be removed if necessary (e.g. for flexible piping). The lower
part of the sockets is coated with 6 mm thick butyl rubber non-absorbent insulation material to prevent
temperature bridges between the socket and the connected piping.
1.8.
Main dimensions of the Xhouse unit
Fig. 6
