42
Version 1 – GBR (25/10/2022)
D-502-0287
-
The following sub-categories of the instructions are consecutive actions to be followed in the order
shown.
7.2.1.
Cleaning the Fan Chamber and Fans
-
Cut the tie tapes securing the motor cable
-
Carefully slide the fan beam and fan assembly (position 11) out of the slot in the unit body.
-
Vacuum dirt from the fan chamber and, if necessary, wipe it with a damp cloth with a common cleaning
agent (e.g. soapy water).
-
With extra care, vacuum dust from the fan
assembly and, if necessary, wipe it with a damp cloth
with a common cleaning agent (e.g. soapy water).
Fig. 54
Fig. 56
3) REMOVE THE UNIT LID
HERE, CUT OFF THE TIE TAPE
HERE, CUT OFF THE TIE TAPE
