16
4.2.2
Record Search
4.2.2.1 Record Search
Go to “Main Menu “→”Record Search” → “Record Search” to enter into the interface.
Time Axis setup, file clip and zoom in/out
1) The X2RxN supports processing control bar function when playing back record files.
Time Axis zoom: Default value is 24 hours. Allow user to select 2 hours, 1 hour, 30
minutes or user-defined.
Channel:
Select the channel you want to search.
Type:
Select the type of playback record. There
are two options, i.e. Normal and Alarm.
Start Time/End Time:
Select the specific period
of time. The default setting is from 0:00 to 24:00.
Playback Channel:
Click a date and select
corresponding channel in Playback Channel.
The selected channels shall not be more than 16.
Playback:
Select the desired year and month
and click “Search”. If there are any records, a
yellow corner mark which shows the recording at
specific date will appear at the down-right corner
of the date sheet. Select the date checkbox and
select playback channel and click Playback to
enter into the interface.
Playback interface:
You can use the Playback
Control bar to operate the Fast Forward (X2, X4,
X8 and X16), Rewind (X2, X4, X8 and X16), Slow
play
(1/2,
1/4
and
1/8
speed),
Play,
Pause/Frame. You can click or drag the volume
control bar to adjust volume. When playback
ends, the X2RXN will remain in the playback
interface
