30
Secondly, select record type (Normal record, Alarm record and All) and channels, and
then click
“ ”
，
and the time axis panel will display specific time
quantum. On the time axis, red part stands for alarm record, yellow stands for normal
record and original part stands for no record during this period.
Before playback, choose to enable playback 4 channels synchronously. If you
Tick-select
“ ”, that means the selected channel will
playback synchronously; otherwise, you could separately control the channels in playback.
Thirdly, start playback. Click to start record playback. When mouse curse is moving
on the time axis, the time point of current position will be displayed on the time axis screen.
Click the icon or to zoom in/out the time bar display ratio.
5.3.2.2 Playback Control
Playback control bar:
Detailed brief description is shown as below list
Key
Description
Key
Description
Play
Enable the volume switch
Pause
Volume adjustment bar
Stop
Slow playing 1/2,1/4.1/8, Fast
playing 1/2/4/8
By frame
Stop playing all the files
Record Clip
Single channel mode
Snap
Quad mode
Download
Full Screen
Open all the playback
channels
Stop playing all the playback
Record file clip:
After opening playback, click icon to clip the selected file; and click again to stop
the clip function. Then playback clip is successfully done. Record clip file will be saved as
*.264 format.
Snapshot function:
Move the mouse curser to the channel you want to capture, and click [
] icon to
capture the live images remotely. After capturing the images successfully, a path prompt
box will be popped up.
