p 7
II. Enrollment and Verification Procedures
This chapter describes how to enroll and verify users on the XD401 unit.
The following topics are included:
· Enrolling User
· Testing an Enrollment
· Enrolling a User with the Display Finger Option On
· Verifying Your Identity
· Hints for Successful Enrollments
Note: You must have Enroller, Manager, or Supervisor status to enroll users. For
information on status levels, see “Authority (Status) Levels” on 1.1.5.
2.1 Enrolling Users
If this is the first enrollment in a new or empty system, everyone will become an enroller.
If there is a manager in the system, you will have Manager status to enroll a new user.
There are three ways of enrollment, fingerprint enrollment, password enrollment,
fingerprint & password are suitable for three differences crowds.
•
Fingerprint enrollment
suited the most people who have better quality fingerprints;
•
Fingerprint & Password
suited few people who enrolling successful, but verification
was difficult;
•
Password enrollment
suited 1% people who verification unsuccessful.
To start the enrollment process, identify yourself firstly - press [Menu], enter your ID
number or fingerprint, and then verify your identity.
Note: If this is the first enrollment in a new or empty system, you will not be prompted for
verification.
The following message appears on the display:
Menu
Ź
User Manage
Options
Sys Info
U
