Ice Cube Maker
EN
13
■
WARNING:
Do not use any mechanical devices or means oth-
er than those recommended by the manufacturer to speed up
the defrosting process.
■
WARNING:
Do not damage the refrigerant circuit.
■
WARNING:
Do not operate any electrical devices within the
refrigerator compartment that do not correspond to the type
recommended by the manufacturer.
■
Do not store any potentially explosive substances, such as aer-
osol cans containing a flammable propellant, in this device.
■
WARNING:
When the device is set up, it must be ensured that
the connecting cable is not jammed or damaged.
■
WARNING:
Do not place portable multiple sockets or power
supplies on the back of the device.
■
The device may only be transported upright!
When the de-
vice is transported and set up, make sure that the device does
not exceed an angle of 45°. The compressor and the cooling
system could be damaged.
■
The device must always be disconnected from the mains pow-
er when it is left unattended and before transporting or clean-
ing the device.
■
Do not make any modifications to the device. Also do not re-
place the connecting cable yourself. If the device, the connect-
ing cable or the accessories of the device are damaged, they
must be replaced or repaired by the manufacturer, customer
service department or a specialist workshop in order to avoid
any hazards.
■
Follow the cleaning instructions in the “Cleaning and Storage”
chapter!
