13
144810(C)
Chapter 4 – Driver Installation
The 1341 comes with the Pro-face Documentation and Support Library CD that contains all drivers
and utilities that meet your needs. Pro-face recommends connecting a parallel port or USB CD-ROM
drive to the 1341 to install drivers or connecting the host computer to the 1341.
Follow the sequence below to install the drivers:
Step 1 – Install INF Driver
Step 2 – Install VGA Driver
Step 3 – Install LAN Driver
Step 4 – Install Audio Driver
USB 2.0 Drivers are available for download using Windows Update for both Windows XP and
Windows 2000. For additional information regarding USB 2.0 support in Windows XP and Windows
2000, please visit
www.microsoft.com/hwdev/usb/.
Please refer to the driver install instructions included in the 1341 Readme.txt file for detailed
installation information.
Windows
2000 Reinstallation
If you need to reinstall the Windows® 2000 operating system, refer to the
Pro-face/Xycom Workstation Recovery Media Software Installation Instructions
for Microsoft® Windows® 2000
(shipped with systems preinstalled with Windows
2000). This document is devoted to the reinstallation of your Windows 2000
operating system and drivers, utilizing the Recovery Media provided with your
Pro-face/Xycom industrial computer. If you want to install a new operating system
or reinstall a current operating system, refer to the operating system’s manual for
directions.
Note
This procedure assumes that the computer hard disk drive has been completely
corrupted or replaced.
Warning
This procedure will destroy data that may exist on the hard disk drive.
