Operation
Turb 430 IR/T
36
ba75507d09
08/2021
4.8.5
Erasing stored measurement datasets
You can erase the stored measurement datasets altogether if you no longer
need them.
Erasing all measurement datasets is done in the menu,
Konfiguration
/
Sys-
tem
/
Messwertspeicher
/
Löschen
.
4.9
Transmitting data
To transmit data via the interfaces, first establish a connection to a PC or
printer (see section 4.9.1).
With the PC software LS Data you can, without further configuration, transmit
or save measurement and calibration data for GLP-compliant data manage-
ment to LS Data or transmit them to Excel and thus to LIMS.
With the MultiLab
®
Importer (an add-in for Microsoft Excel) you can transmit
data from the meter directly to an open Excel sheet (see section 4.9.3).
The connection to a printer or terminal program has to be configured so data
can be safely transmitted (see section 4.9.4).
4.9.1
Establishing the connection to a PC
You have the following possibilities of transmitting data from the Turb 430 IR/
T to a PC
via the RS232 interface of the Turb 430 IR/T
or
via the RS232 interface of the LabStation LS Flex/430
(accessories, see
Prerequisites
Microsoft Windows PC with one of the following operating systems:
– Windows 7
– Windows 8
– Windows 10.
Free interface of the PC
– Serial COM interface
Erasing individual datasets is not possible. If all memory loca-
tions are occupied, however, it is possible to overwrite the oldest
dataset at a time. A security prompt appears before a dataset is
overwritten.
