Turb 430 IR/T
Operation
37
ba75507d09
08/2021
or
– USB interface:
and USB adapter (accessory)
Connection to the PC
– Connecting cable AK 540/B (accessory, see chapter 8)
or
– LabStation LS Flex/430 (accessory, see chapter 8)
Establishing a
connection
4.9.2
Data transmission with the PC software LS Data
With the PC software LS Data you can transmit and save to the LS Data any
measurement- and calibration data for GLP compliant data management
(menu item
Datei
/ Speichern unter...
/ *. csv (CSV format)) or transmit and
save to Excel (menu item
Datenaustausch
/
Export (.xls)
) and thus transfer
to LIMS.
4.9.3
Data transmission with the Excel add-in MultiLab
®
Importer
1 Connect the Turb 430 IR/T to the PC via the RS232 or
via the LabStation LS Flex/430 (see operating manual LS Flex/430).
The connection to the PC is established. The data can be transferred
to the PC:
via the PC software LS Data (see section 4.9.2)
via the MultiLab
®
Importer (see section 4.9.3)
via a terminal program (see section 4.9.6).
1
Establish the connection to a PC (see section 4.9.1).
2
Transmit data (see operating manual of the PC software LS Data).
Set the CSV output format for datasets at the Turb 430 IR/T. It is
selected in the menu,
Konfiguration
/
System
/
Schnittstelle
/
Ausgabeformat
1
Establish the connection to a PC (see section 4.9.1).
2
Establish a data connection (see operating manual
MultiLab
®
Importer).
3
