Operation
Turb 430 IR/T
38
ba75507d09
08/2021
4.9.4
Configuration for the data transmission to a terminal program
Via the RS232 interface you can also transmit data to a PC with the aid of a
so-called terminal program.
4.9.5
Establishing the connection to a printer
Via the RS 232 interface, you can transmit data to an external printer.
Suitable printers
P3002 (see section 8 A
)
P3001 (no longer available as accessory)
1
Establish the connection to a PC (see section 4.9.1).
2
Determine the output format of datasets at the Turb 430 IR/T (see
section 4.9.5 E
It is selected in the menu,
Konfiguration
/
System
/
Schnittstelle
/
Aus-
gabeformat
.
Examples of the output formats (see section 4.9.6)
3
Configure the RS232 interface of the Turb 430 IR/T and the terminal
program.
The transmission data specified in the Turb 430 IR/T and terminal
program have to match.
RS232 interface (see section 4.5.3).
Terminal (see operating manual of your terminal).
Transmission data:
Baud rate
can be selected from: 1200, 2400, 4800, 9600,
19200
Handshake
none
Parity
None
Data bits
8
Stop bits
1
4
Transmit data (see section 4.9.6).
Examples of transmitted data (see section 4.9.7)
