Turb 430 IR/T
Operation
39
ba75507d09
08/2021
Socket assign-
ment (RS232)
4.9.6
Starting the data transmission at the Turb 430 IR/T
(at MultiLab
®
Importer, printer, terminal program
With a printer connected or a connection to a terminal program existing, you
can transmit data in the following ways:
1
Connect the RS232 interface to the external printer with the AK540/
S cable.
The Turb 430 IR/T is pre-configured for the connection of the
printer.
2
For error-free data transmission:
The RS232 interface of the Turb 430 IR/T and the printer have to be
set to the same transmission speed (
Baudrate
).
The baud rate of the Turb 430 IR/T is selected in the menu
Kon-
figuration
/
System
/
Schnittstelle
/
Baudrate
.
The setting of the baud rate of the printer and the default setting
are in the documentation of your printer.
3
Selecting the output format of datasets (Turb 430 IR/T)
It is selected in the menu,
Konfiguration
/
System
/
Schnittstelle
/
Aus-
gabeformat
.
Examples of the output formats (see section 4.9.7)
4
Transmitting data (see section 4.9.6).
Examples of transmitted data (see section 4.9.7)
Individual data
(e.g. measured val-
ue, calibration pro-
tocol)
Display the data and press
<PRT>
.
The data being shown on the display are transmit-
ted to the interface.
Simultaneously with every manual storage pro-
cess.
RS 232
REC
1
3
4
5
6
2
1 RTS
2 RxD
3 TxD
4 DTR
5 SG
6 CTS
