12
2.3
2.4
Menu Layout
System Menu
Press the Esc key to escape back to the Run screen. The left arrow can be used to go back to the previous menu in all screens except
alpha/numeric entry screens. Functions that are enabled appear as a circle with a dot or a box with a check mark. Disabled functions
appear as an empty circle or empty box.
• Date/Time
• Language
• Radix Point
• Logging
• Auto-Shutoff
• Firmware Version
• Update Firmware
• Serial #
• PCB #
Any item with [brackets] shows the current setting inside the brackets. For
instance, in the example screenshot above, Radix Point is currently set to
[Decimal]. The brackets provide a quick visual clue as to what items can be
changed.
System Menu
g
Date/Time
Highlight Date/Time from the System menu. Press enter to select.
Date/Time Options
• Date Format
– Highlight and press enter to open a sub menu for selecting
the preferred date format: YY/MM/DD, MM/DD/YY, DD/MM/YY, or YY/DD/
MM.
• Date
– Highlight and press enter to use the numeric entry screen to set the
correct date.
• Time Format
– Highlight and press enter to open a submenu to select the
preferred time format from 12-hour or 24-hour.
• Time
– Highlight and press enter to use the numeric entry screen to set the
correct time
Press the System key to access instrument setup options. These include:
Figure 9
System menu
Figure 10
Date/Time
03/03/20 10:34:42 AM
System
100%
Date/Time
Language [English]
Radix Point [Decimal]
Logging [Single]
Auto-Shutoff [30 minutes]
Firmware Version: 0.0.18
Update Firmware
Serial #: 19XXXXXXXX
PCB #: 7XXXXXXX
03/03/20 10:34:42 AM
Date/Time
100%
Date Format: [MM/DD/YY]
Date: [03/03/19]
Time Format: [12-hour]
Time: [10:34:42AM]
