Page | 51
7.8
Aanderra Doppler Current Profiling Sensor (DCPS)
7.8.1
Mounting
As with the DCS, the DCPS mounts using the brackets on the side of the instrument tube. Because the DCPS is
considerably larger, a bracket that stands further off from the instrument tube is required, different to the DCS
bracket.
7.8.2
Configuration
The DCPS operation is almost identical to the DCPS except that the default baud rate is 115,200. The interface
configuration requirements are the same.
7.9
Seabird SBE16+
7.9.1
Cable
The instrument uses a Y cable to provide access to the RS232 receive and transmit lines as shown below.
Black=GND, White= Pin 3 (RS232), Red=Pin 2(RS232).
