pg
|
88
Sonde
Replace EXO2 Bail
Sonde bails provide users with a handle for convenient transport and an attachment point for cable strain
reliefs. If an EXO2 bail breaks due to impact or standard wear and tear throughout the life of the sonde, a
user can easily replace it. Always attach the cable’s strain relief mechanism to the bail. Do not use the cable
connector to support the whole weight of the sonde. Although the cable connector and locking ring are very
robust, always use the strain relief to mitigate unnecessary pressure on the connection.
1 Remove bail.
Use a small screwdriver to remove two screws on the sides
of the bail.
Once screws are removed, lift the bail off the sonde.
2 Install new bail.
Place the new bail onto the sonde, aligning holes for the
screws. Use a small screwdriver to insert two screws on the
sides of the bail. Tighten until snug.
6.3
