Xylem FLOJET BW5000 Series, Manual

3

Typical Beverage Installations

Coffee Cart/Kiosk

The 

Bottled Water Booster System

may also be placed in a pantry, closet,
cellar or other location where a 

grounded electrical outlet

 is available.

Application

• 

Designed for dispensing Bottled Water 
to coffee machines, beverage dispensers, 
vending machines and carts. See diagrams

• 

For remote locations where mains water 
supply is not accessible

• 

Ideal for under counter installation

Installation and Operation

Installation procedure:  See Figure 1

1. 

Securely mount in a suitable position.  If mounting vertically to a wall, ensure that the mounting fixings are 
suitable for the product’s wet weight.  Ensure that the on / off switch is accessible and that there is sufficient 
space above the accumulator tank to access the air valve

2. 

Pre-charge accumulator tank to 18 PSI (1.2 Bar) per the troubleshooting section

3. 

Install appropriate adapter onto the universal wall power transformer, plug into grounded electrical outlet 
and into the pump module

4. 

Fill water tank

5. 

Install suction wand with universal cap seal, float switch and hose assembly

6. 

Open all faucets and switch appliance(s) on to fill if necessary

7. 

Turn the ON/OFF switch located on the pump module to the “ON” position to prime pump

8. 

When water is free of air, turn all faucets off beginning with the faucet closest to the pump

Regular cleaning and sanitizing of the Flojet Bottle Water Booster System is required.
The BW Booster System is only to be used with the power supply provided.
Check accumulator tank pressure every 6 months and adjust as necessary.
Important:  Do not operate the pump more than 20 minutes continuously.