Xylem FLYGT CCD 301, Installation, Operation And Maintenance Manual

1.3.1  Power lock-out

DANGER: Electrical Hazard

Before starting work on the unit, make sure that the unit and the
control panel are isolated from the power supply and cannot be
energized. This applies to the control circuit as well.
 

1.3.2  Qualification of personnel

WARNING: Electrical Hazard

Risk of electrical shock or burn. A certified electrician must
supervise all electrical work. Comply with all local codes and
regulations.

All work on the product must be carried out by certified electricians or Xylem
authorized mechanics.
Xylem disclaims all responsibility for work done by untrained, unauthorized
personnel.

1.4  End of life product disposal

Handle and dispose of all waste in compliance with local laws and regulations.

EU only: Correct disposal of this product — WEEE Directive on waste electrical and electronic

equipment

WS009973A

This marking on the product, accessories or literature indicates that the product

should not be disposed of with other waste at the end of its working life.
To prevent possible harm to the environment or human health from

uncontrolled waste disposal, please separate these items from other types of

waste and recycle them responsibly to promote the sustainable reuse of

material resources.

1  Introduction and Safety

4

CCD 301 Installation, Operation, and Maintenance Manual