Settings
Multi 3620 IDS
80
ba77169d06
10/2021
tings are printed in
bold
.
Setting menu of the
VisoTurb
®
900-P
11.6 Sensor-independent settings
11.6.1
System
To open the
Storage & config
menu, press the
<MENU/ENTER_>
key in the
measured value display. After completing the settings, switch to the measured
value display with
<M>
.
Default settings are printed in
bold
.
Menu item
Possible
setting
Explanation
Calibration
/
Calibration record
-
Displays the calibration record of the
last calibration.
Calibration
/
Calibration data
storage
/
Display
-
Displays the last calibration records
(max. 10)
Calibration
/
Calibration data
storage
/
Output to
USB flash drive or
printer
-
Outputs the stored calibration data
to a connected USB memory device/
USB printer)
Calibration
/
Calibration data
storage
/
Output to
RS232/USB
-
Outputs the calibration data storage
to the interface
Calibration
/
Calibration interval
1 ...
30
...
999 d
Calibration interval
for the turbidity
sensor (in days).
The meter reminds you to calibrate
regularly by the flashing sensor sym-
bol in the measuring screen.
Auflösung
0.1
1
Resolution of the FNU/NTU display
Reset
-
Resets all sensor settings to the
delivery condition (see section
11.7.1).
Menu item
Setting
Explanation
System
/
General
/
Language
Deutsch
English
(more)
Selects the menu language
System
/
General
/
Acoustic signal
on
off
Switches on/off the beep on keystroke
System
/
General
/
Illumination
Auto
on
Switches the display illumination on/off
