Multi 3620 IDS
Data memory
ba77169d06
10/2021
89
12.3 Measurement data memory
12.3.1 Editing the measurement data memory
The contents of the manual or automatic measurement data storage can be
shown on the display.
Each of the measurement data memories has a function to erase the entire
contents.
Editing the data
memory
The memory is edited in the menu,
Storage & config
/
Data storage
. To open the
Storage & config
menu, press the
<MENU/ENTER_>
key in the measured
value display.
Open the manual or automatic storage directly with the
<RCL>
or
<RCL_>
key.
Settings
The settings are explained here using the manual data memory as
an example. The same settings and functions are available for the
automatic data memory.
Menu item
Setting/
function
Explanation
Data storage
/
Manual data storage
/
Display
-
Displays all measurement data-
sets page by page.
Further options:
Scroll through the datasets
with
<
><
>
.
Output the displayed dataset
to the interface with
<PRT>
.
Quit the display with
<ESC>
.
Data storage
/
Manual data storage
/
Output to USB flash
drive or printer
-
Outputs all stored measurement
data to a connected USB flash
drive / USB printer.
Data storage
/
Manual data storage
/
Output to RS232/
USB
-
Outputs all stored measurement
data to the interface.
Data storage
/
Manual data storage
/
Erase
-
Erases the entire manual mea-
surement data memory.
Note:
All calibration data remain stored
when this action is performed.
