Multi 3620 IDS
Settings
ba77169d06
10/2021
85
condition with the
Reset
function:
The sensor settings are reset under the
Reset
menu item in the menu for cali-
bration and measurement settings. To open the settings, display the required
measured parameter in the measured value display and press the
<MENU/
ENTER>
key.
11.7.2 Resetting the system settings
The following system settings can be reset to the default status:
The resetting of the system settings is done in the menu
Storage & config
/
System
/
Reset
. To open the menu
Storage & config
in the measured value
display, press the
<MENU/ENTER_>
key.
Setting
Default settings
Calibration interval
30 d
Measured parameter
FNU
Auflösung
0.1
Setting
Default settings
Language
English
Acoustic signal
on
Baud rate
4800 Baud
Output format
ASCII
Decimal separator
.
Brightness
15
Illumination
Auto
Switchoff time
1 h
Temperature unit
°C
Stability control
on
