5 Installation
5.1 Precautions
Before starting work, make sure that the safety instructions in the chapter
on page 3 have been read and understood.
WARNING:
All work must be performed by qualified personnel trained in the proper application,
installation, and maintenance of the equipment.
5.2 Mounting options
Location
The Gateways are intended to be positioned in clean, protected, and dry indoor
environments. The enclosures are rated for dust, and water ingress protection.
Procedure
• The rear enclosure includes two key hole slots that accept screw heads to hang the unit
on a vertical surface. The screw head diameter can be no larger than 7 mm with a
maximum thread diameter of 3.75 mm and a head height of 3.2 mm.
• When the screw is installed in the mounting surface, the space between screw head and
mounting surface shall be no less than 5 mm to account for the thickness of plastic and
rubber feet.
• Space the mounting screws 44.45 mm (1.75 in) apart.
(1.75)
44.45
External Antenna positioning
For optimal performance, external antennas should be positioned vertically, tip pointing up,
perpendicular to the ground regardless of mounting surface orientation.
Precaution
To avoid damage, be sure to use appropriate anchors and screws when mounting on vertical
surfaces.
5 Installation
8
optimyze
™
Gateway Instruction, Operation, and Maintenance Manual
