OxiTop
®
Control OC 100
Operating mode: BOD Standard / BOD Routine
ba31114e07
08/2014
23
Start the next measuring head
(2).
Contact selection:
The number of the measuring
head is automatically incre-
mented.
The controller continues to work with the contact selection, i.e.
you can now start a sequence of measuring heads (parallel
sample process) without having to press any further keys by
holding the controller to the next measuring head to be
started.
When all the measuring heads provided for this sample have
been started:
Confirm
Stop
start
with
<RUN/ENTER>
.
The controller returns to the entry menu.
If no measuring head is started (e.g. because the controller
was not held to - or not close enough to - a measuring head):
The start was stopped.
Use
<RUN/ENTER>
- Continue
start
to confirm “Continue
start” and hold the controller to a
measuring head (see above).
Return to entry level menu with
- Stop
start
If an attempt is made to start a measuring head that was
already started:
Displays
already used!
Use
<RUN/ENTER>
to confirm
-
New
and hold the controller
to a free measuring head (see
above).
Return to entry level menu with
- Stop
start
In the delivery state, the controller automatically makes space when
Start
is selected if the measured value memory is full.
To do this, it deletes the oldest finished sample (if a finished sample
is available). You can change this setting to “manual erase” (see
section 7.4.6 D
Summary of Contents for OxiTop Control OC 100
