10 / 25
Password protection
3.5
It´s possible to protect the menu items Calibration (
CAL
) and Configuration (
CONF
) by a password.
This password can be defined in the menu item (
CONF
) under „
General
“
The password to open the individual menus is deactivated when the device is delivered!
Passwort = 0 (status at time of delivery)
Passwort > 0 (password inquiry is active – the user is asked for a password))
The password can have up to 4 digits (1 - 9999).
Password configuration:
(
CONF
) > „
General
“ > „
Password
“
>
enter and repeat password.
Via (
INFO
) or (
CAL
) you select the position to change.
Via (
CONF +1
) or (
LOG -1
) you change the position.
(
ON/OFF
) confirms and saves your setting.
(
MEAS
) terminates the entry dialog without transferring the value.
4
Configuration of basic settings
Via (
CONF
) you will get to the menu item „
Configuration
“ and then on to submenu item „
General
“.
The entire structure of the menu (
CONF
) is displayed graphically in
chapter 3.4.
Under „
General
“, the following device-relevant basic settings can be configured:
Display
backlight and contrast
Password
Password
Clock
Clock
Reset
Restart device
Language
Language
Time OFF
Time until automatic switch-off
Response action
Filtering the measured value
Configuration of the backlight and the contrast
4.1
The backlight of the display can be switched on or off on the meter.
Configuration of the lighting:
„
General
“ > „
Display
“
>
„
Backlight
“, then select
activate
/
deactivate
.
Configuration of contrast:
„
General
“ > „
Display
“
>
„
Contrast
“, then select
low
-
medium
-
high
.
Via (
CONF +1
) or (
LOG -1
) you selected the desired setting.
(
ON/OFF
) confirms and saves your setting.
(
MEAS
) terminates the entry dialog without transferring the value.
Configuration of the password
4.2
The menu items calibration (
CAL
) and configure (
CONF
) can be protected by a password.
The password to open the individual menus is deactivated when the device is delivered!
Password = 0 (status at time of delivery)
Password > 0 (password inquiry is active, the user is asked for a password)
The password can have up to 4 digits (1 - 9999).
