Commissioning
Alyza IQ PO4
32
ba76201d03
05/2020
3
Press the plastic protective plugs (1) into the upper ends of both square
supporting pipes (3).
4
Using the triangular stabilizing sheets (4), connect both square support-
ing pipes (3) with the preassembled ground pipes (2). For each side, use
six hexagon head screws with large plain washers, spring washers and
locknuts as shown in Abb. 3-2,
31. Make sure the two sides mirror
each other after being mounted.
figure 3-3 Connecting the supporting pipes with the cross pipes
1
Square cross pipe
2
Angle bracket
5
Connect both supporting pipes with each other using the two square
cross pipes (1). For each joint, use two angle brackets (2), three hexa-
gon head screws, two large plain washers, three spring washers and
three locknuts.
1
2
Summary of Contents for WTW Alyza IQ PO4
Page 171: ......
