Commissioning
Alyza IQ PO4
40
ba76201d03
05/2020
3.3.7 Installation on a wall
With the C-rails on its rear side, the Alyza IQ is hooked into the retaining hooks
of the WM wall mounting set.
NOTE
Make sure that the wall is strong enough for the weight of the Alyza IQ and that
the mounting material (screws, plugs, etc.) is suitable for the wall type. If neces-
sary, use other screws and plugs than the ones provided.
Proceed as follows to install the housing on a wall:
figure 3-11Fixing the housing (on the right: Detailed view)
1
Angle bracket
1
7
Fix the housing on both sides with four brackets (1) so it cannot shift
sideways. For each bracket, use two short hexagon head screws, small
plain washers, spring washers and locknuts.
1
Drill eight holes as shown in the following figure:
Summary of Contents for WTW Alyza IQ PO4
Page 171: ......
