DW/P
Installation
19
ba77278e01
01/2024
3.2.7 Installing the power supply
Installation activities for the power supply may only be performed by a qualified
electrician:
The following components have their own power supply:
Turbidimeter
IQ S
ENSOR
N
ET
For details on the installation of the power supply, see the operating manuals of
the components.
The IQ S
ENSOR
N
ET
supplies the components of the
IQ S
ENSOR
N
ET
with power. The power requirement of all com
-
ponents in the IQ S
ENSOR
N
ET
determines the number of power
supply modules needed.
For the power supply of the IQ S
ENSOR
N
ET
within the framework
of the drinking water panel, one module with power supply is suf
-
ficient.
To supply more components of the IQ S
ENSOR
N
ET
with power,
a power rating is required. This determines the number of power
supply modules required (see system operating manual of the
IQ S
ENSOR
N
ET
).
1.
Connect the power supply for the turbidimeter
(see operating manual for the turbidimeter). Guide the cable of the
power supply through the cable opening of the drinking water panel.
2.
Connect the power supply for the IQ S
ENSOR
N
ET
(see operating manual for the power supply module or operating man
-
ual of the DIQ/S 28X).
Guide the cable of the power supply through the cable opening of the
drinking water panel.