English
inoLab
®
Multi 9620 IDS
4
ba77175y01
02/2016
inoLab
®
Multi 9620 IDS
Overview
The Multi 9620 IDS meter enables you to perform measurements (pH, U, ION,
conductivity, D.O.) quickly and reliably.
The Multi 9620 IDS meter provides a maximum degree of operating comfort,
reliability and measuring certainty.
Keypad
Keys are indicated by brackets <..>.
The key symbol (e.g. <ENTER>) generally indicates a short keystroke (under
2 sec). A long keystroke (approx. 2 sec) is indicated by the underscore behind
the key symbol (e.g. <ENTER
_
>).
<F1>
<F1
_
>
<F4>
<F4
_
>
Situation dependent function (is shown on the display)
<On/Off>
Switches the meter on or off
<M>
Selects the measured parameter
<CAL>
<CAL
_
>
Calls up the calibration procedure
Displays the calibration data
<STO>
<STO
_
>
Saves a measured value manually
Opens the menu for the automatic save function
<RCL>
<RCL
_
>
Displays the manually stored measured values
Displays the automatically stored measured values
<
><
>
<
><
>
Menu control, navigation
<ENTER>
<ENTER
_
>
Opens the menu for measurement settings / confirms entries
Opens the menu for system settings
<AR>
Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
<ESC>
Cancels an action
<PRT>
<PRT
_
>
Sends data to the interface (USB)
Opens the menu for automatic output to USB
EN English
