Operation
Multi 3430
35
ba75865e19
04/2015
4.4.2
Data storage
This menu contains all functions to display, edit and erase stored mea-
sured values.
Note
Detailed information on the storage functions of the Multi 3430 is given
in section 4.13.
4.4.3
Automatic
Stability control
The automatic
Stability control
(AutoRead) function continuously
checks the stability of the measurement signal. The stability has a con-
siderable impact on the reproducibility of measured values.
You can activate or switch off the automatic
Stability control
function
(see section 4.4).
The measured parameter flashes on the display
as soon as the measured value is outside the stability range
when you switch over between the measured parameters with
<M>
.
System
/
Interface
/
Extended Oxi
output
The measured values for the
parameters concentration (mg/
l) and saturation (%) are output
together.
The function is active if the fol-
lowing requirements are met:
A D.O. sensor is connected
The D.O. sensor displays
the parameter concentration
(mg/l) or saturation (%)
The
Output format
CSV
is
selected
System
/
Clock function
Date format
Date
Time
Settings of time and date.
For details, see section 4.3.5
System
/
Service information
Hardware version and software
version of the meter are dis-
played.
System
/
Reset
-
Resets the system settings to
the default values.
For details, see section 4.16.2
Menu item
Setting
Description
Summary of Contents for WTW Multi 3430
