Multi 9430
Data storage
ba75966e04
04/2015
101
10 Data storage
You can transmit measured values (datasets) to the data storage:
Manual data storage (see section 10.1 M
Automatic data storage at intervals (see section 10.2 A
10.1 Manual data storage
You can transmit a measurement dataset to the data storage as follows. The
dataset is at the same time output to the interface:
If the storage is full
When all storage locations are occupied, it is not possible to continue storing.
Then you can e.g. transmit the stored data to a PC or a USB flash drive (see
section 10.3.1 E
, page 104) and sub-
sequently erase the storage (see section 10.3.2 E
10.2 Automatic data storage at intervals
The storage interval (
Interval
) determines the time interval between automatic
data storage processes. Each data storage process transmits the current data-
set to the interface at the same time.
Configuring the
automatic storage
function
1.
Press the
<STO>
key shortly.
The menu for manual data storage appears.
2.
If necessary, change and confirm the ID number (1 ... 10000) with
<
><
>
and
<ENTER>
.
The dataset is stored. The meter switches to the measured value dis-
play.
03.04.2013 11:24:16
pH 7.000 24.8 °C AR +++
ID number:
1
continue
Manual data storage 4 von 500
01.08.2013 08:00
1.
Press the
<STO_>
key.
The menu for automatic data storage appears.
