Multi 9430
Transmitting data
ba75966e04
04/2015
109
11.5 Options for data transmission to the USB-B (PC)
interface and the USB-A (USB printer) interface
Via the USB-B interface you can transmit data to a PC.
Via the USB-A interface, you can transmit data to a USB printer or USB mem-
ory device. How to transmit data to a USB memory device is described in an
extra section (see section 11.6 D
The following table shows which data are transmitted to the interface in which
way:
Data
Control
Operation / description
Current
measured
values of all
connected
sensors
Manual
With
<PRT>
.
Simultaneously with every manual data storage process (see
section 10.1 M
Automatic, at
intervals
With
<PRT_>
.
Then you can set the transmission interval.
Simultaneously with every automatic data storage process (see
section 10.2 A
Stored mea-
sured values
Manual
Displayed dataset with
<PRT>
after calling up from the storage.
All datasets with the
Output to RS232/USB
function.
All datasets with the
Output to USB flash drive or printer
function
(USB-A interface)
For details, see section
Calibration
records
Manual
Displayed calibration record with
<PRT>
(see section 4.2.6 C
All calibration records with the
Output to USB flash drive or
printer
function.
All calibration records with
<PRT
_
>
.
For details, see section
Automatic
At the end of a calibration procedure.
The following rule applies: With the exception of the menus, shortly
pressing the
<PRT>
key generally outputs the display contents to
the interface (displayed measured values, measurement datasets,
calibration records).
