Multi 9430
ba75966e04
04/2015
21
Forgotten the
password?
Contact the administrator.
3.8
Navigation
3.8.1 Operating modes
3.8.2 Measured value display
In the measured value display, you can
use
<
><
>
to select one of several connected sensors. The selected
sensor is displayed with a colored background.
The following actions / menus refer to the selected sensor
open the menu for calibration and measurement settings with
<ENTER>
(short keystroke)
open the
Storage & config
menu with the sensor-independent settings by
pressing
<ENTER_>
(long keystroke, approx. 2 s).
change the display in the selected measuring screen (e. g. pH
<−>
mV) by
pressing
<M>
.
3.8.3 Menus and dialogs
The menus for settings and dialogs in procedures contain further subelements.
5.
In the
Password
field, enter the old password with
<
><
>
and
<
><
>
and confirm it with
<ENTER>
.
6.
In the
New password
field, enter the new password with
<
><
>
and
<
><
>
and confirm it with
<ENTER>
.
The password is changed.
The login takes place. If a sensor is connected the measured value dis-
play appears.
Operating
mode
Explanation
Measuring
The measurement data of the connected sensor are shown
in the measured value display
Calibration
The course of a calibration with calibration information, func-
tions and settings is displayed
Storage in
memory
The meter stores measuring data automatically or manually
Transmittin
g data
The meter transmits measuring data and calibration records
to a USB interface automatically or manually.
Setting
The system menu or a sensor menu with submenus, set-
tings and functions is displayed
