Multi 3630 IDS
pH value
ba77170e03
10/2017
35
3
Thoroughly rinse the IDS sensor with deionized water.
4
Immerse the IDS sensor in buffer solution 1.
5
For measurements without temperature sensor
(e.g. when using an IDS adapter
)
:
Measure the temperature of the buffer manually and enter it with
<
><
>
.
6
Start the measurement with
<ENTER>
.
The measured value is checked for stability (stability control).
The [AR] status indicator is displayed. The measured parameter
flashes.
7
Wait for the measurement with stability control to be completed or ter-
minate the stability control and take over the calibration value with
<ENTER>
.
The pH value of the buffer solution is displayed.
15.03.2016 08:00
ConCal
15.03.2016 08:00
ConCal
