pH/ION 3310
Settings
ba77052d01
03/2014
49
Setting the calibra-
tion interval
The calibration interval is set to 7 days in the factory.
You can change the interval (1 ... 999 days):
8.1.4
Settings for ORP measurements
The settings for ORP measurements are made in the menu for calibration and
measurement settings of the pH/ORP measurement. To open the settings, dis-
play the required measured parameter in the measured value display and
press the
<ENTER>
(or
<F1>
/
[Menu]
)
key. After completing the settings, switch
to the measured value display with
<M>
.
In the following table, only those settings are listed that influence the ORP mea-
surement.
Default settings are printed in
bold
.
1.
Using
<ENTER>
(or
<F1>
/
[Menu]
)
, open the menu for the measurement
settings.
2.
In the
Calibration
/
Calibration interval
menu, set the calibration interval
with
<
><
>
.
3.
Confirm the setting with
<ENTER>
.
4.
Quit the menu with
<M>
.
Menu item
Possible
setting
Description
Man. temperature
-25 ...
+25
...
+130 °C
Entry of the manually determined
temperature. For measurements
without temperature sensor only.
Resolution mV
0.1
1
Resolution of the mV display
Reset
-
Resets all sensor settings to the
delivery condition (see section 8.3.1
R
Summary of Contents for WTW pH/ION 3310
Page 76: ...Index pH ION 3310 76 ba77052d01 03 2014...
Page 77: ......
