pHotoFlex
®
Turb
Operation
69
ba75976e07
09/2021
4.9.5 Configuration for the data transmission to a terminal program
Via the RS232 interface you can also transmit data to a PC with the aid of a
so-called terminal program.
When using the terminal program "HyperTerminal", you can load
the transfer data automatically with the *.ht file stored on the CD.
1 Establish the connection to a PC (see section 4.9.1).
2 Determine the output format of datasets at the pHotoFlex
®
Turb (see
It is selected in the menu,
Configuration
/
System
/
Interface
/
Output
format
.
Examples of the output formats (see section 4.9.6)
3 Configure the RS232 interface of the pHotoFlex
®
Turb and the termi-
nal program.
The transmission data specified in the pHotoFlex
®
Turb and terminal
program have to match.
RS232 interface (see section 4.4.3).
Terminal (see operating manual of your terminal).
Transmission data:
Baud rate
can be selected from: 1200, 2400,
4800
, 9600,
19200
Handshake
none
Parity
none
Data bits
8
Stop bits
1
4 Transmit data (see section 4.9.6).
Examples of transmitted data (see
