pHotoFlex
®
Turb
Commissioning
15
ba75976e07
09/2021
3.2.2
Inserting/exchanging the batteries
NOTE
Make sure that the poles of the batteries are positioned correctly.
The ± signs on the batteries must correspond to the ± signs in the battery
compartment.
1
Open the battery compartment:
– Unscrew the two screws (1) on the underside of the meter,
– Remove the lid of the battery compartment (2).
2
If necessary, take four old batteries out of the battery compartment.
3
Insert four batteries (3) in the battery compartment.
4
Close the battery compartment and fix it with the screws.
1
2
