pHotoFlex
®
Turb
Operation
21
ba75976e07
09/2021
4.3.2 Navigation
Measured value
display
In the measured value display, you can
select a measuring mode with
<M>
(long pressure)
select a measured parameter in the active measuring mode (e. g. pH
<−
>
mV) with
<M>
(short pressure)
open the menu with
<MENU>
switch to the superordinate
Start
menu with
<ESC>
.
Menus and dialogs
The menus for settings and dialogs in procedures contain further subele-
ments. The selection is done with the keys
<
V
> <
W
>
.
The current selection is displayed inverse.
Menus
The name of the menu is displayed at the upper edge of the frame. Menus
are opened by confirming with
<START/ENTER>
. Example:
Settings
Settings are indicated by a colon. The current setting is displayed on the
right-hand side. With
<START/ENTER>
, the selection of the possible set-
tings is opened. Subsequently, the setting can be changed with
<
V
> <
W
>
and
<START/ENTER>
.
Example:
Functions
Functions are designated by the name of the function. They are immedi-
ately carried out when you confirm them with
<START/ENTER>
.
Example: display the
Calibr. record
function
(in the
pH & ORP
/
Calibration
menu).
Photometry
Turbidity
pH & ORP
System
Info
Configuration
Language
:
Deutsch
Beep
:
Off
Illumination
:
On
Contrast
:
48 %
Temperature unit
:
°C
Switchoff time
:
30 min
System
