Operation
pHotoFlex
®
Turb
62
ba75976e07
09/2021
4.8
Memory
The meter has 2000 storage locations for measurement datasets.
You can transmit measured values (datasets) to the data memory with the
<STO>
key.
Each data storing process transmits the current dataset to the interface at the
same time.
The number of memory locations that are still free is displayed in the
Store
menu. The number of memory locations that are occupied is displayed in the
System
/
Measured value memory
menu.
Measurement
dataset
A complete dataset consists of:
Date/time
ID number (ID)
and the following measurement data, depending on the selected measur-
ing mode
If
i
Calibration error!
is displayed as the calibration result, the dis-
play indicates that a new calibration is required before a mea-
surement is taken. If a valid calibration is not possible, the meter
also offers to continue measuring with the last valid calibration
data.
i
Insert sample
i
Press and hold <START>
i
Align sample
Turbidity
Measuring
mode
Measured data
Photometry
:
Program number
Measured value
Citation form
Use of a blank value (BV)
Dilution (x +1)
Turbidity
:
Measured value
