Setup
, Configuration and Calibration
Turb PLUS 2000
100193 Rev 0 ba77254e01 11/2020
37
6.2.14
Instrument ID – Instrument Unique Number Identification
This menu provides the instrument with a unique ID up to 4 digits. This ID can be used when
logged data is downloaded. This enables the data to be associated with a particular instrument or
location.
To set the instrument ID:
1. Enter the
CONFIG
mode by pressing the
and
buttons until the arrow beside
CONFIG
is
illuminated, then press the
button.
2. Press the
button to move to the next menu until
ID
is displayed.
3. Use the
and
buttons to select the value of the first number. Use the
to select the next number
and repeat the process for all numbers. Scroll through the numbers to the next menu.
6.2.15
Logging Interval – Setting the interval for logged files
This menu determines how often readings are logged. The setting is in minutes. This can be set
from 1 minute to 60 minutes.
To set the logging interval:
1. Enter the
CONFIG
mode by pressing the
and
buttons until the arrow beside
CONFIG
is
illuminated, then press the
button.
2. Press the
button to move to the next menu until
INVL
is displayed.
3. The value can be adjusted by using the
and
buttons.
4. Once the value is set
,
press the
button to accept it and move to the next menu or the
button to
exit and return to
AUTO
.
