32
Ammonium, Nitrate, and Chloride Sensor Calibration Record Content – Up to
3 Calibration Points
• Date and Time
• Buffer Value
• Sensor Value (mV)
• Temperature
• Calibrate Status
Barometer Calibration Record Content
• Date and Time
• Cal Value
• Calibrate Status
ORP Sensor Calibration Record Content
• Date and Time
• Cal Solution Value
• Sensor Value
• Temperature
• Calibrate Status
View Data ID List
“Use Data ID List” must be enabled in System
g
Logging for data to be tagged with a Data ID.
From the Files Menu, highlight
Data ID List
and press enter. The Data ID List can also be viewed and managed under System
g
Logging.
New entries can be created by choosing
Add new...
Data IDs already created are shown in alphabetical order on the Data ID list. Choose
an entry from the Data ID list to Select, Edit, or Delete. When selected, data recorded
will be ‘tagged’ with the Data ID (i.e. the Data ID will be saved as part of the data set).
Figure 51
View Calibration
Records
03/03/20 10:34:42 AM
View Cal. Records
100%
Conductivity [10 of 10]
Date: 03/03/20
Time: 07:18:35AM]
Method: Salinity
Cal Value:
45.38 SAL ppt
Sensor V.:
45.38 SAL ppt
Temp. Ref.: 25.0 °C
Temp. Coeff.: 0.0191 %/°C
TDS Constant: 0.65
Show Data
Figure 52
Data ID List
03/03/20 10:34:42 AM
Data ID List
100%
Add new...
Caesar’s Creek
Little Miami
Yellow Springs
Figure 53
Selecting a Data ID
03/03/20 10:34:42 AM
Data ID List
100%
Select [Caesar’s Creek]
Edit [Caesar’s Creek]
Delete [Caesar’s Creek]
