Configuration Menu
Select specific protocol(s) by removing letters from or adding letters to the brackets. To
remove a letter, type the letter and press RETURN. The prompt reappears; however, the
letter you typed does not appear within the brackets. To add a letter to those within the
brackets, type the letter and press RETURN. The prompt reappears and the letter you typed
is included within the brackets.
When the letters within the brackets represent all the protocols you want to use, press
RETURN.
2. The configuration menu prompts:
Enable ALL methods for parameter loading (Y,N) [Y]?
Valid answers to this prompt are:
Y -- Use any parameter loading method: XMOP (Xyplex proprietary protocol), MOP (DEC
Maintenance Operations Protocol), BOOTP (Bootstrap Protocol), RARP (Reverse Address
Resolution Protocol)
N -- Use specific method(s)).
a . If you answer Y, proceed to Step 3.
b. If you select N, the configuration menu prompts:
Toggle (CARD,XMOP,MOP,BOOTP,RARP) parameter load methods [C,X,M,B,R]:
Valid answers to this prompt are C (Memory card), X (Xyplex Proprietary protocol), M
(DEC MOP loader), B (BOOTP) or R (RARP). You can select up to four parameter
loading methods.
Selecting C enables the unit to store and load parameters from a Memory card. Selecting X
enables the Terminal Server 720 to store and load parameters at a Xyplex MAXserver
Manager or at another Network 9000 module which has a memory card. Selecting M
enables the unit to store and load parameters via the DEC MOP loader protocol. Selecting B
enables the unit to store and load parameters at a BOOTP/TFTP host. Selecting R enables
the unit to store and load parameters via RARP/TFTP.
Select specific protocol(s) by removing letters from or adding letters to the brackets. To
remove a letter, type the letter and press RETURN. The prompt reappears; however, the
letter you typed does not appear within the brackets. To add a letter to those within the
brackets, type the letter and press RETURN. The prompt reappears and the letter you typed
is included within the brackets.
When the letters within the brackets represent all the protocols you want to use, press
RETURN.
C-70
0021
