Place item on feed tray.
Guide item forward while slowly
turning knob clockwise until your
item comes out of the back of
the machine.
Press down on cut blade and
slide to the left or right to cut.
Note: For a smooth cut, place
your finger all the way back to
the back of the cut blade holder.
1 Insert
2 Turn
3 Trim
1 Insert Item
2 Turn Handle
3 Trim
Basic Operation as easy as 1-2-3!
Unloading & Loading
Gently pull cartridge up
and out of machine.
Helpful Hints
Open cartridge compartment
by lifting up on latch.
• For best results, turn the handle slowly.
• If machine rollers pick up adhesive after
use, clean with isopropanol alcohol.
• Store your machine and cartridge
between 40ºF and 70ºF
• Can laminate up to 9” wide
and up to 60’ long.
• Xyron laminates are adhesive based,
so they will not peel or separate.
You can cut close to edge
or into document itself.
Open lid. Slide cartridge down
into tracks on machine sides with
exposed roll of material facing
open lid cover. Close lid securely.
Advance laminate and trim.
Visit
www.xyron.com
for more information.
Handle:
Advances items
through the machine
when turned clockwise.
The Built-in Grip/Carry Handle:
Take your machine almost
anywhere.
The Input Tray:
Use to feed items into tray.
Patented Easy Loading Cartridge:
Allows you to replace
cartridge in seconds.
Features & Functions
1 Open
3 Load
1 Open
2 Upload
3 Load
2 Unload
