3.
Point the collector down while shaking slightly (see Figure 12.) and the waste
solder will fall out. This task must be carried out periodically for proper operation
of the station.
4.
Remove cooling strip with a pair of long nose pliers or tweezers.
(see Figures 13 & 14)
5.
Clean the cooling strip and glass collector with wire brush (included).
Page.9
PROCEDURE FOR REPLACING FILTERS
SOLDER COLLECTOR FILTERS
1.
Be sure the iron/filter assembly have cooled.
2.
Hold iron as in Figure 10, press/turn red knob on the butt of iron.
3.
Remove solder collector (see Figure 11).
4.
Disassemble the solder collector into 2 pars (see Figures 15 & 16).
10
Summary of Contents for LF-8000
Page 14: ...13...