3
●
Do not use if damaged:
If the pump doesn’t work or the rework station becomes
faulty, discontinue using immediately. To comply with safety standards, the pump
or other part must only be replaced by authorized technicians as special purpose
tools are required. Only the technician is permitted undertake repairs. Use the
original replacement part only.
●
Remember unplug in the power cord:
The station must be switched off and the
power cord must be unplug-in before replacing the fuse in AC socket in rear side of
the machine.
PRODUCT FEATURES
◆
With specially intelligent chip microcomputer control design, double LED display
operate by pressing keys, make it convenient and comfortable operation.
◆
Temperature and air blow by digital display readout, easy to read.
◆
With the high power heating element, heat up quickly, the momentary power can
reach 550W.
◆
Temperature adjustable, suits for removing QFP, SOP, PLCC or SOJ chips etc.,
especially the built in static free circuit design is safety for the sensitive elements
like CMOS ICs.
◆
Auto-cooling design: When the power switch off, the cooling system will begin to
work automatically, the temperature falls down to 7
5℃(167℉)
to protect the
heating element from burning ..
◆
Heating element auto-protecting function: When heating element reaching a high
temperature which can be protected automatically, to lasting the life of heating
element.
PRODUCT DESCRIPTION
The temperature controlled Hot-Air LF-852D SMD rework station built in an
intelligent microcomputer chip which is specially designed for the present lead free
SMD chips such as SOIC, CHIP, QFP, PLCC, BGA etc reworks to meet RoHS
requirement. This appliance equipped with a high power heating element and gets very
fast heat up time. A high-quality sensor and heat transfer technology ensure precise
temperature regulation is essential for making consistent, reliable. The aluminum
housing has the advantages of strong structure, good heat sink and effectively resistant
of electro-magnetic interference.
