Revision 3.1
WebRelay
TM
Users Manual
9. Reboot Timer 2 (T2):
Pulse Time 2 (in seconds). See “Reboot Options” below for details. This time can be set from 1 to
60000 seconds (1000 minutes or 16.666 hours).
10. Reboot Timer 3 (T3):
Pulse Time 3 (in seconds). See “Reboot Options” below for details. This time can be set from 1 to
60000 seconds (1000 minutes or 16.666 hours).
11. Reboot Options:
This parameter defines how the device will be re-booted. This is determined by the way
WebRelay
TM
is connected to the device. There are several options for connection. Three reboot
methods are discussed here which will help in understanding of how reboot options should be set.
Reboot Method #1: Connect WebRelay
TM
in series with the power source of the device. By doing
this, WebRelay
TM
can switch the device on and off by switching the power to the device on and off.
Xytronix Research & Design, Inc.
page 30