Revision 3.1
WebRelay
TM
Users Manual
Appendix A: Restoring Factory Default Settings
In the event that the IP address or passwords are forgotten, WebRelay
TM
may be restored to its original factory default
settings. To do this, first remove the power from the unit. Next, insert a thin object (such as a toothpick) through the
small hole in the bottom of the unit to press the small button that is located inside the unit. When the object is
inserted, a tactile feel can be detected as the button is depressed. While holding the button down, apply power and
wait for about 10 seconds. After about 10 seconds, release the button. Now all settings will be back to the original
factory defaults. CAUTION: DO NOT USE METAL OBJECTS FOR THIS FUNCTION.
Xytronix Research & Design, Inc.
page 49
Reset Button Access Hole