w w w . e k t
2
. c o m
Electronics
Katrangi
Trading
User Manual da Vinci 2.0 Duo
P 6
Display Panel: Information on printer status.
Extruder Module: a print module which heats the filament to molten state, and pull the melted
fi
lament out through nozzle for printing.
Z-Axis Rod: a rod which moves the print bed vertically during printing.
Front Door: a door enclosing the working space; should only be opened during operating or
maintenance.
Print Bed: Provides a
fl
at surface to lay the 3D model.
Cartridge Slot: a space for loading
fi
lament cartridge.
USB Port: a port for connecting USB cable.
Power Switch: a swtich for turning on/off the power of the printer.
Power Connector: a connector for connecting the power cord.
Extruder Module
Z-Axis
Print Bed
USB Port
Cartridge Slot
Remove the
packaging supports
Remove the
print bed fixing
screws and
printing module
fixers
Power Switch
Power
Connector
Front Door
Control Panel
Display Panel
GLUE STICK
．
Filament Cartridge x2
．
Power Cord
．
USB Cable
．
Decorative Plate x2
．
Software CD
．
User Quick Guide
．
Cartridge Locker x2
．
Glue Stick
．
Copper Brush
．
Cleaning Wire x5
．
Scraper
Once the 3D printer is turned off, wait at least 3 seconds before turning it on again.
Attention
