-1-
◆
Package Content
◆
Product Diagram
◆
Operation
1
Connect the Micro USB cable to the 3D pen
and the USB power adapter, and plug the
power adapter to a power source.
(the LED should be solid red light).
2
Press any button to begin heating up the
nozzle (the LED indicator should be steady
flashing red light).
3
Once the heating is complete (green indicator
is ON), press the [Load Button] twice to
activate continuous extrusion mode. Insert
XYZprinting filament into the feeding hole. Let
go of the filament once you feel the pen
taking in the filament on its own.
3D Pen
1
Micro USB cable
2
Drawing pad
3
Trial filament
(Including 6 x PCL filaments. Length:1 meter;
color: random)
4
3D coloring worksheets
5
Quick guide /Warranty card
6
◎
Loading/Extruding the filament
Solid red light :
Powered on; cooled down.
Steady flashing red light :
Idling; cooling down.
Quick flashing red light :
Heating up.
(under cooling mode, heating will take
another 15 seconds)
Solid green light :
Nozzle is heated, it's ready to
load/unload filament now.
(Nozzle temperature reaches 60°C)
The nozzle cools down when idling for 60
seconds. To heat up the nozzle, simply press
any button.
【
LED Messages
】
ENGLISH
Quick Guide
DC in terminal
Feeding hole
LED indicator
Unload button
Load button
Air vents
Nozzle
2
3
4
5
6
7
8
Extruder
module
1
(Micro USB interface)
◆
Precaution
The nozzle of the 3D pen becomes heated. Do
not let the nozzle of the pen come in contact with
surrounding components before it completely
cools. Do not touch the extruded plastic materials
that have not yet cooled to prevent burns. The
heated nozzle of the pen and extruded plastic
materials may damage other objects, plastics,
fabrics, or other materials. Avoid touching
anything with these heated objects until the
nozzle is completely cooled.
Keep the air vents open to ensure that the 3D pen
works properly.
The heated filaments generate certain odors
during the heating and extrusion process. Please
use this product in a well-ventilated space.
Please use PCL filaments provided by XYZprinting
and follow the operations instructions when using
this product to avoid product damage and bodily
harm. Warranty void if non-XYZprinting filaments
are used.
The product is fully tested on the production line.
The testing material may be left in the nozzle. The
color of the extruded filament might differ from the
feeding filament in the first use.
The material in the nozzle might produce a slight
cracking sound while heating up.
Operating conditions
●
Temperature: 20–35°C/ 68–95°F
●
Humidity: 30–60% RH (non-condensing)
Storage conditions (including 3D Pen and filament)
●
Temperature: 10– 40°C/ 50–104°F
●
Humidity: 25–65% RH (non-condensing)
Power Requirements: USB power adapter with
support for 5V 2A (Power adapter not included)
It is suggested to store the filament in the zipped
bag after each use, keep it in a cool, dry place to
away from direct sunlight.
To prevent accidents, do not allow young children
to use and process troubleshooting unless
supervised by an adult.
1
2
3
4
5
6
7
8
9
BURN HAZARD
10
11
