V1.5
-8-
• Please slice the 3D model with XYZware_Nobel and save it in .3wn
format. Files in other format or not sliced with XYZware_Nobel will not be
shown.
• For correct file name display, please name the file with English and
Japanese (Katakana preferred) alphabets and numbers.
* Sample files are stored in the bundled USB drive. To print samples, please select the file based on the color of the resin installed.
Note
PRINT FROM USB
"Layer Height" indicates the resolution of a print. Using
thinner layers will make higher quality prints but will also
take longer to print.
Printing setup varies based on the color and material of
the resin. Please set the option based on the resin
cartridge installed on the printer before printing. It is
advise to include color setting in filename for instant
distinction in the future.
Check "Brim" for the 3D objects that has less contact with
the platform to increase adhesion.
Complex 3D models are composed of a large amount of
meshes. Enable this function for slicing such models may
save the render time as it will reduce the facets to 200
thousand elements. This function can also repair the 3D
model when necessary.
Options under Export :
③
①
②
④
①
②
③
④
PC-link Printing via XYZware_Nobel
Before printing from PC, please first install XYZware_Nobel on your device.
Connect your PC to the printer before installing the
software, or the installation may be incomplete.
"XYZware_Nobel" Installer can be found in the bundled USB drive or at XYZprint-
ing website:
http://support.xyzprinting.com/global_en/Support/download (log in is required)
Minimum system requirements for XYZware_Nobel:
System RAM: 4GB and above
Graphics RAM: 1GB and above (OpenGL 2.1+ compatible)
Hard disk space: 300MB and more
Operating system requirements : Windows 7/8+ (32bits and 64 bits)
Mac OSX 10.8+
A.
B.
Import objects in .stl/.3wn format: Open file browser and select the .stl or .3wn files to print. ".3wn" format is sliced by
XYZware_Nobel based on the printer type selected. For the file set to slice for printer type other than "Nobel 1.0", XYZware_Nobel may not
import it.
Export to .3wn format: After selecting a desire printout setting, click on "Export" to save the model to a sliced .3wn file. Once the file is sliced, you
may skip repeating settings in the future.
(Overview of XYZware_Nobel)
Functions:
Insert USB flash drive to the USB
drive port at the back of the printer.
press
▼
to browse the menu, and press [OK] to select a file to
proceed:
XYZ
_
KEY
►
Mini
_
nobel
my
_
nobel
XYZ
_
KEY2
START PRINTING
?
XYZ
_
KEY
NO
►
YES
A
G
H
I
J
K
L
M
N
O
B C D
E F
Auto Repair
