Skystream Owner’s Manual
3-CMLT-1054 Rev O XCO 1191
Pg. 10
Your Skystream Shipment Includes:
Your Skystream shipment includes the following components. For your convenience a small quantity of
spare fasteners is included with each Skystream. The quantities indicated below are quantities required
to assemble Skystream:
Turbine Assembly on Pallet
• Includes: turbine, nosecone, blade hub, blade plate (screwed to pallet), M42 hub mounting nut.
Blades (may be shipped separately)
• Blade mounting hardware
- M10 x 120, grade 10.9, hex head bolts (quantity 12)
- M10, grade 10.9, nut (quantity 12)
Nosecone Mounting Hardware
• M6 x 12 socket head screws, A2 stainless steel (quantity 3)
Skystream to Tower Mounting Hardware
• Vibration Isolators (quantity 8)
• Vibration Isolator Snubbing Washers (quantity 8)
• M12 x 90 hex head bolts, grade 10.9 (quantity 8)
• M12 nuts, grade 10.9 (quantity 8)
Yaw Shield
• Yaw shield halves (quantity 2)
• M5 x 12 socket head screws (quantity 4)
Strain Relief Cover
• Cover with ground wire (quantity 1)
• M5 x 12 socket head screws (quantity 4)
Miscellaneous
• RF antenna (quantity 1)
Skyview Interface Kit
• Permits remote monitoring of Skystream performance via personnel computer.
TIP:
See exploded view on page 23.
Installation Personnel
XZERES Wind recommends professional installation of Skystream. While Skystream is not difficult to
install, and many homeowners have successfully installed their own Skystream, knowledge of local
zoning and building code requirements, construction techniques, as well as residential electrical
systems is required for a safe installation.
Skystream dealers displaying the following insignia have completed factory training on the correct and
safe installation of Skystream.
