25 Revolution Z-7789
24 Revolution Z-7789
EN
Radio
Switch on appliance
Press
ON / STANDBY
Choose display
FM
Press
FUNC
repeatedly
NOTE
Improve FM radio reception: Adjust the antenna wire (on the back of the appliance).
Press FM / STEREO on the appliance to select the required mode. Select
MONO
or
STEREO
.
The symbol
ST
appears on the display if
STEREO
mode is active. If reception is poor
ST
begins to flash. Switch over to
MONO
for better reception. When
FM
mode is running the
screen shows information on the frequency or RDS information, if available, such as the
programme name, title name or contact details. To get more information on the broadcast-
ing station, press
INFO
at the device.
Adjust frequency
Scan manual
Press
PREV
resp.
NEXT
The scanning is being done in steps. Frequeny is displayed.
Scan automatic
Press
PREV
resp.
NEXT
for 2 seconds
Scans automaticaly, stops when the next station is found.
Save frequency
Press and hold down the desired number button on the remote control. The frequency is saved
There are 10 preset memory slots. The display shows the numbers with
preset stored
.
Find a
saved frequency
Press the numbers button on the remote control
Overwrite saved positions: save the new frequency on the desired position.
